Both are injected into cracks, but they solve different problems. Choosing incorrectly is one of the most common reasons an injection repair fails to hold.
They solve different problems
Both are injected into cracks, but they are not interchangeable. PU reacts with water and expands to stop flow. Epoxy is a rigid structural adhesive that bonds a dry crack back together. Choosing the wrong one is the most common reason an injection repair fails.
When PU is right
Use PU when water is actively running or the substrate is wet. It reacts on contact and expands within seconds, which is exactly what is needed to arrest a live leak. It stays flexible, so it tolerates slight movement, but it adds no structural strength.
When epoxy is right
Use epoxy when the crack is dry, dormant and structural. The cured resin is stronger than the concrete, restoring continuity so the element carries load as one piece again. It will not bond to a wet surface and it will crack again if the member is still moving.
Where acrylic gel fits
Acrylic gel sits between the two. Its viscosity is close to water, so it penetrates hairline cracks that PU cannot enter, and it can be injected right through a wall to form a curtain barrier in the soil behind — without excavating.
In Practice
What This Means For Your Building
The condition has to be assessed on site before a system is specified. HAVEN FORCE reviews the substrate, the exposure and the way the defect is presenting, then recommends a treatment matched to what is actually happening rather than to the symptom alone.
- Assess the condition on site before specifying a system
- Identify the mechanism, not only the visible symptom
- Match materials to substrate, exposure and expected performance
- Prepare, apply and inspect to a documented standard