Industrial Flooring by HAVEN FORCE Technical Services in Dubai
Epoxy & Protective Coatings

Industrial Flooring

Floors Built for Production

Production and warehouse floors face point loads, impact, chemicals and constant forklift traffic. HAVEN FORCE installs heavy-duty flooring systems specified against the real operating conditions of the facility.

Heavy
Duty

Impact
Resistant

Chemical
Proof

Hygiene
Compliant

Common Problems

What We Typically Find

The conditions most often reported before a industrial flooring scope is developed.

01

Floor breaking down under forklifts

Coating too thin for the point loads and wheel traffic.

02

Joints spalling at the arrises

Unprotected joint edges breaking up under hard wheels.

03

Chemical attack in process areas

Spills degrading the floor and reaching the slab.

04

Difficult cleaning in hygiene areas

Porous or jointed floors that cannot be properly sanitised.

Scope & Application

What This Service Covers

Service Scope

  • Operational and load assessment
  • Shot blasting and mechanical preparation
  • Joint and crack treatment
  • Moisture testing and vapour barrier if required
  • Heavy-duty screed or self-levelling system
  • Coving to walls in hygiene areas
  • Anti-slip and chemical-resistant finishes
  • Line marking and safety zoning

Suitable For

  • Car Parking Areas
  • Warehouses & Logistics
  • Industrial Facilities
  • Commercial Buildings
  • Retail & Shopping Centers
  • Hospitals & Labs
  • Schools & Educational
  • Residential Garages

Key Benefits

  • Handles heavy point and wheel loads
  • Impact and abrasion resistant
  • Chemical resistance where needed
  • Supports hygiene compliance
  • Long service life under production
  • Reduces downtime and repair
  • Safety zoning and anti-slip
  • Specified to the actual process
Our Process

Work Methodology

Five controlled stages from first inspection to final quality check.

Assessment — Industrial Flooring
1

Assessment

Understand loads, traffic, chemicals and cleaning regime before specifying.

Preparation — Industrial Flooring
2

Preparation

Shot blast the slab, treat joints and check moisture content.

Priming — Industrial Flooring
3

Priming

Apply primer, with a vapour barrier where slab moisture requires it.

System Installation — Industrial Flooring
4

System Installation

Lay the heavy-duty screed or self-levelling system to thickness.

Detailing & Marking — Industrial Flooring
5

Detailing & Marking

Form coving, apply anti-slip finish and set out safety marking.

Materials & Systems

Specified To The Condition

Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.

Epoxy Screed

Trowel-applied at high build for maximum impact and load resistance.

PU-Cement Screed

Tolerates thermal shock and aggressive chemicals in wet process areas.

Coving Systems

Radiused wall junctions that eliminate dirt traps in hygiene areas.

Gallery

Work In Progress

Industrial Flooring — site photograph
View
Industrial Flooring — site photograph
View
Industrial Flooring — site photograph
View
Industrial Flooring — site photograph
View
Full Gallery
FAQs

Questions About Industrial Flooring

It depends on loads and impact. Screeds for heavy duty are typically several millimetres rather than a thin coating.
Usually in phases — bay by bay or aisle by aisle, with programme agreed around your operation.
PU-cement systems with coving, since they tolerate steam cleaning, thermal shock and aggressive sanitisers.
WhatsApp Call Us