Basement Waterproofing by HAVEN FORCE Technical Services in Dubai
Waterproofing Solutions

Basement Waterproofing

Dry, Usable Space Below Ground

Basements sit under permanent water pressure, so waterproofing has to work as a continuous system rather than a coating. HAVEN FORCE tanks basement walls and slabs using systems selected against the ground conditions, the water table and whether the face is accessible from outside.

Water Tight
Tanking

Hydrostatic
Resistance

Usable
Dry Space

Long-Term
Durability

Common Problems

What We Typically Find

The conditions most often reported before a basement waterproofing scope is developed.

01

Damp walls and musty odour

Persistent moisture migrating through the wall build-up into the room.

02

Water at the wall-to-slab junction

The kicker joint leaking because it was never sealed during construction.

03

Efflorescence and salt staining

Salts carried out of the concrete by moisture and deposited on the surface.

04

Standing water after rainfall

Groundwater rising and entering through slab cracks or service entries.

Scope & Application

What This Service Covers

Service Scope

  • Site survey and water table assessment
  • Surface preparation and crack treatment
  • Negative-side cementitious tanking
  • Positive-side membrane where accessible
  • Kicker and construction joint sealing
  • Pipe penetration detailing
  • Cavity drainage systems where specified
  • Final testing and inspection

Suitable For

  • Residential Basements
  • Underground Car Parks
  • Commercial Basements
  • Plant & Service Rooms
  • Storage Areas
  • Villa Basements

Key Benefits

  • Stops water ingress
  • Makes the space usable
  • Reduces damp and mould risk
  • Protects stored contents and finishes
  • Extends structure life
  • Avoids repeat remedial cost
  • Works without external excavation
  • Improves property value
Our Process

Work Methodology

Five controlled stages from first inspection to final quality check.

Site Assessment — Basement Waterproofing
1

Site Assessment

Establish the water table, entry points and whether the external face is reachable.

Preparation — Basement Waterproofing
2

Preparation

Remove failed finishes, open and treat cracks, clean back to sound substrate.

Tanking Application — Basement Waterproofing
3

Tanking Application

Apply the specified cementitious or membrane system in full coats.

Joint & Penetration Detailing — Basement Waterproofing
4

Joint & Penetration Detailing

Seal kicker joints, service entries and corners with reinforcement.

Testing & Handover — Basement Waterproofing
5

Testing & Handover

Water-test where practical, then inspect and hand over.

Materials & Systems

Specified To The Condition

Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.

Crystalline Cementitious

Penetrates the concrete and seals the capillaries — works against negative pressure.

Flexible Cementitious

Two-component system that accommodates minor movement without cracking.

Cavity Drainage Membrane

Studded sheet that manages water to a drainage channel rather than resisting it.

Gallery

Work In Progress

Basement Waterproofing — site photograph
View
Basement Waterproofing — site photograph
View
Basement Waterproofing — site photograph
View
Basement Waterproofing — site photograph
View
Full Gallery
FAQs

Questions About Basement Waterproofing

In most cases no. Basements are usually treated from the inside using negative-side tanking and injection.
Crystalline and cavity drainage systems are both designed for negative-side pressure. The choice depends on the head of water measured on site.
Yes. Once the system has cured and been checked, the walls can be dry-lined or finished as normal.
WhatsApp Call Us