Expansion Joint Waterproofing by HAVEN FORCE Technical Services in Dubai
Waterproofing Solutions

Expansion Joint Waterproofing

Movement Without Leakage

Expansion joints exist so a structure can move, which makes them the hardest place to keep watertight. HAVEN FORCE installs joint systems that accommodate the designed movement while maintaining a continuous seal across decks, podiums and car parks.

Movement
Accommodating

Continuous
Seal

Traffic
Rated

Serviceable
System

Common Problems

What We Typically Find

The conditions most often reported before a expansion joint waterproofing scope is developed.

01

Water running through a deck joint

The original sealant hardened, split and lost its bond to the joint faces.

02

Sealant pulled away from one edge

Adhesion failure from poor preparation or an incorrect joint width.

03

Damaged joint arris

Concrete edges breaking down under traffic and widening the gap.

04

Previous repairs failing repeatedly

A rigid material used where the joint genuinely needs to move.

Scope & Application

What This Service Covers

Service Scope

  • Joint survey and movement assessment
  • Removal of failed sealant and backing
  • Arris repair where required
  • Joint face preparation and priming
  • Backer rod installation to correct depth
  • Movement-capable sealant or joint system
  • Waterproofing dressed into the joint
  • Testing and inspection

Suitable For

  • Car Park Decks
  • Podium Decks
  • Industrial Floors
  • Roof Expansion Joints
  • Building Movement Joints
  • Ramps & Access Decks

Key Benefits

  • Accommodates real structural movement
  • Restores a continuous water barrier
  • Handles vehicle traffic
  • Lasts far longer than a rigid patch
  • Avoids repeated remedial visits
  • Protects the structure below
  • Correct backer depth and joint geometry
  • Serviceable and replaceable
Our Process

Work Methodology

Five controlled stages from first inspection to final quality check.

Survey — Expansion Joint Waterproofing
1

Survey

Measure joint width, assess movement range and inspect the arris condition.

Strip Out — Expansion Joint Waterproofing
2

Strip Out

Remove failed sealant and backing back to sound joint faces.

Arris Repair — Expansion Joint Waterproofing
3

Arris Repair

Reinstate broken concrete edges so the joint has a sound face to bond to.

Seal Installation — Expansion Joint Waterproofing
4

Seal Installation

Fit backer rod to the right depth, prime and install the movement joint system.

Inspect — Expansion Joint Waterproofing
5

Inspect

Check adhesion, profile and continuity with the surrounding waterproofing.

Materials & Systems

Specified To The Condition

Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.

Polyurethane Sealant

High-movement sealant that stays flexible through thermal cycling.

Backer Rod

Closed-cell rod that sets the correct sealant depth-to-width ratio.

Trafficable Joint Profile

Metal or elastomeric cover system for joints carrying vehicles.

Gallery

Work In Progress

Expansion Joint Waterproofing — site photograph
View
Expansion Joint Waterproofing — site photograph
View
Expansion Joint Waterproofing — site photograph
View
Expansion Joint Waterproofing — site photograph
View
Full Gallery
FAQs

Questions About Expansion Joint Waterproofing

Usually because the joint was filled with a rigid material, or the depth-to-width ratio was wrong so the sealant could not stretch.
Yes — that is what the system is designed for. The material is chosen for the measured movement range.
Yes. A sealant cannot bond to crumbling arrises, so edges are reinstated first.
WhatsApp Call Us