Acrylic Gel Injection by HAVEN FORCE Technical Services in Dubai
Leakage & Injection

Acrylic Gel Injection

Curtain Sealing Behind the Structure

Acrylic gel has a viscosity close to water, which lets it travel into hairline cracks and through the structure into the soil behind. It is the technique used to form a curtain barrier on the outside of a wall without excavating.

Water-Like
Viscosity

Curtain
Barrier

Flexible
Gel Seal

No
Excavation

Common Problems

What We Typically Find

The conditions most often reported before a acrylic gel injection scope is developed.

01

Damp over a wide wall area

Diffuse seepage rather than one defined leak, which point injection cannot solve.

02

Hairline cracking too fine for PU

Pathways narrower than conventional resins can enter.

03

No external access to the wall

Buried face that cannot be excavated to apply a membrane.

04

Seepage through porous concrete

Water moving through the body of the concrete itself.

Scope & Application

What This Service Covers

Service Scope

  • Moisture mapping across the area
  • Grid drilling through the full wall thickness
  • Packer installation to the soil face
  • Acrylic gel curtain injection
  • Secondary internal crack injection
  • Packer removal and making-good
  • Negative-side coating where specified
  • Monitoring and verification

Suitable For

  • Basements
  • Retaining Walls
  • Construction Joints
  • Lift Pits
  • Water Tanks & Reservoirs
  • Swimming Pools
  • Podiums & Underground
  • Tunnels & Utility Ducts

Key Benefits

  • Forms a barrier outside the wall
  • Penetrates the finest pathways
  • No excavation required
  • Remains flexible when cured
  • Treats broad damp areas
  • Far cheaper than digging out
  • Long-term seepage control
  • Works under water pressure
Our Process

Work Methodology

Five controlled stages from first inspection to final quality check.

Inspection — Acrylic Gel Injection
1

Inspection

Map the damp area and confirm wall thickness and construction.

Grid Drilling — Acrylic Gel Injection
2

Grid Drilling

Drill a calculated grid through the wall to the soil face.

Curtain Injection — Acrylic Gel Injection
3

Curtain Injection

Inject acrylic gel to form a continuous barrier behind the wall.

Sealing & Finishing — Acrylic Gel Injection
4

Sealing & Finishing

Remove packers, fill holes and make the surface good.

Verification — Acrylic Gel Injection
5

Verification

Monitor the area and confirm the seepage has stopped.

Materials & Systems

Specified To The Condition

Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.

Acrylic Gel Resin

Very low viscosity, gels in a controlled time and stays flexible.

Through-Wall Packers

Long packers that deliver resin to the outer face of the structure.

Cementitious Overlay

Applied internally after treatment where a finished surface is required.

Gallery

Work In Progress

Acrylic Gel Injection — site photograph
View
Acrylic Gel Injection — site photograph
View
Acrylic Gel Injection — site photograph
View
Acrylic Gel Injection — site photograph
View
Full Gallery
FAQs

Questions About Acrylic Gel Injection

PU fills the crack itself. Acrylic gel goes right through and forms a barrier in the soil behind the wall.
No. The gel volume is small and it cures in place within the ground immediately behind the structure.
Yes — that is its main advantage. A grid pattern treats a broad area rather than a single crack.
WhatsApp Call Us