Kicker Joint Injection
The Wall-to-Slab Junction
The kicker is the short concrete upstand at the base of a wall, and the joint between it and the slab is one of the most common leak paths in any basement. HAVEN FORCE injects kicker joints to close this route permanently.
Wall-to-Slab
Junction
Stops
Base Leakage
Pressure
Capable
Verified
Seal
What We Typically Find
The conditions most often reported before a kicker joint injection scope is developed.
Water pooling at the base of a wall
Ingress at the kicker line running along the floor.
Damp rising in the lower wall
Moisture entering at the joint and wicking upward.
Failed surface sealant at the junction
Fillet seals applied over a joint that is under pressure.
Corrosion of starter bars
Sustained moisture at the joint attacking reinforcement.
What This Service Covers
Service Scope
- Joint identification along the wall base
- Angled drilling to intersect the kicker joint
- Packer installation at close spacing
- PU injection to arrest active flow
- Acrylic gel to the soil face where needed
- Packer removal and making-good
- Cementitious fillet and coating
- Final inspection and testing
Suitable For
- Basements
- Retaining Walls
- Construction Joints
- Lift Pits
- Water Tanks & Reservoirs
- Swimming Pools
- Podiums & Underground
- Tunnels & Utility Ducts
Key Benefits
- Stops leakage at the wall base
- Treats the full junction line
- Protects starter reinforcement
- Makes the basement usable
- Internal access only
- Long-term seal
- Avoids external excavation
- Withstands hydrostatic pressure
Work Methodology
Five controlled stages from first inspection to final quality check.
1
Inspection
Identify the kicker line and where water is entering along it.
2
Drilling
Drill at an angle to intersect the joint between kicker and slab.
3
Injection
Inject PU at close spacing along the joint until flow stops.
4
Fillet & Coating
Form a cementitious fillet and coat the junction.
5
Final Inspection
Confirm the joint is dry across its full length.
Specified To The Condition
Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.
Hydrophobic PU Resin
Arrests active flow at the joint interface.
Crystalline Cementitious Fillet
Forms a coved, self-sealing secondary barrier at the junction.
Mechanical Packers
Close-spaced to give continuity along the joint.
Questions About Kicker Joint Injection
Related Leakage & Injection Services
Leakage Repair
Stop Leakage. Restore Strength. Protect for the Future.
ViewSeepage Repair
Stop Seepage. Protect Your Space.
ViewPU Injection
Arresting Active Water, Fast
ViewEpoxy Injection
Structural Bonding for Dry Cracks
ViewAcrylic Gel Injection
Curtain Sealing Behind the Structure
ViewConstruction Joint Injection
Sealing the Cold Joint
View