PU Injection
Arresting Active Water, Fast
Polyurethane injection is the method of choice when water is actively running through a crack or joint. The resin reacts with water and expands in place, filling the void and stopping flow before the permanent treatment is applied.
Reacts With
Water
Rapid
Expansion
Flexible
Cured Seal
Minimal
Disruption
What We Typically Find
The conditions most often reported before a pu injection scope is developed.
Water running under pressure
Flow that no surface sealant or cementitious patch will hold back.
Leaking construction joints
Cold joints acting as a continuous channel through the structure.
Lift pit and sump ingress
Water accumulating faster than the pump can clear it.
Leaks around pipe penetrations
Service entries that bypass the waterproofing envelope entirely.
What This Service Covers
Service Scope
- Leak path identification and marking
- Drilling at calculated angle and spacing
- Mechanical packer installation
- Controlled-pressure PU resin injection
- Secondary injection where flow persists
- Packer removal and hole making-good
- Surface reinstatement
- Verification and documentation
Suitable For
- Basements
- Retaining Walls
- Construction Joints
- Lift Pits
- Water Tanks & Reservoirs
- Swimming Pools
- Podiums & Underground
- Tunnels & Utility Ducts
Key Benefits
- Stops actively running water
- Works fast under pressure
- Stays flexible after curing
- Low-disruption technique
- Avoids external excavation
- Long-lasting seal
- Suitable for wet substrates
- Documented and verifiable
Work Methodology
Five controlled stages from first inspection to final quality check.
1
Inspection
Identify leakage source and assess condition.
2
Drilling & Packers
Drill holes across the crack at an angle and install injection packers.
3
Injection Application
Inject PU resin under controlled pressure until flow stops.
4
Sealing & Finishing
Remove packers and finish the surface.
5
Final Inspection
Quality check to ensure a leak-free and durable result.
Specified To The Condition
Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.
Hydrophobic PU Resin
Expands on water contact and cures to a closed-cell foam that resists re-wetting.
Hydrophilic PU Resin
Higher expansion for joints that see intermittent movement and wetting.
Mechanical Packers
Steel packers sized to the drill diameter and rated for injection pressure.
Questions About PU Injection
Related Leakage & Injection Services
Leakage Repair
Stop Leakage. Restore Strength. Protect for the Future.
ViewSeepage Repair
Stop Seepage. Protect Your Space.
ViewEpoxy Injection
Structural Bonding for Dry Cracks
ViewAcrylic Gel Injection
Curtain Sealing Behind the Structure
ViewConstruction Joint Injection
Sealing the Cold Joint
ViewKicker Joint Injection
The Wall-to-Slab Junction
View