Basement Leakage Injection
Dry Basements Without Digging
Basement leakage is treated from the inside using injection, avoiding the cost and disruption of excavating around the structure. HAVEN FORCE combines crack, joint and curtain injection to close every route water is using.
No
Excavation
Stops
Active Leakage
Curtain
Option
Long-Term
Dry Space
What We Typically Find
The conditions most often reported before a basement leakage injection scope is developed.
Water entering at several points
Multiple pathways through joints, cracks and tie-holes at once.
Damp spreading across whole walls
Diffuse seepage through porous concrete rather than a single crack.
Leakage that worsens after rain
A rising water table increasing pressure on the structure.
Unusable storage or parking space
Persistent water preventing the basement being used as intended.
What This Service Covers
Service Scope
- Full survey and moisture mapping
- Crack and joint injection (PU)
- Tie-hole and penetration sealing
- Acrylic gel curtain injection where required
- Kicker joint treatment
- Negative-side cementitious tanking
- Sump and drainage review
- Monitoring before handover
Suitable For
- Basements
- Retaining Walls
- Construction Joints
- Lift Pits
- Water Tanks & Reservoirs
- Swimming Pools
- Podiums & Underground
- Tunnels & Utility Ducts
Key Benefits
- Returns the basement to use
- No external excavation
- Stops active and passive ingress
- Treats broad areas by curtain injection
- Long-term protection
- Far cheaper than digging out
- Protects structure and contents
- Designed for hydrostatic pressure
Work Methodology
Five controlled stages from first inspection to final quality check.
1
Inspection
Survey the whole basement and map every entry point.
2
Preparation
Open cracks, clean joints and prepare surfaces for treatment.
3
Injection
Inject PU at active points and acrylic gel where a curtain is needed.
4
Tanking
Apply negative-side cementitious tanking across the treated areas.
5
Monitoring
Observe over a period, then confirm and hand over.
Specified To The Condition
Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.
PU & Acrylic Resins
Selected per pathway — PU for flow, acrylic for fine or diffuse seepage.
Crystalline Cementitious
Secondary negative-side barrier over the treated substrate.
Hydrophilic Waterstop
Used at joints and penetrations that stay damp.
Questions About Basement Leakage Injection
Related Leakage & Injection Services
Leakage Repair
Stop Leakage. Restore Strength. Protect for the Future.
ViewSeepage Repair
Stop Seepage. Protect Your Space.
ViewPU Injection
Arresting Active Water, Fast
ViewEpoxy Injection
Structural Bonding for Dry Cracks
ViewAcrylic Gel Injection
Curtain Sealing Behind the Structure
ViewConstruction Joint Injection
Sealing the Cold Joint
View