Soil Stabilization / Injection Grouting by HAVEN FORCE Technical Services in Dubai
Leakage & Injection

Soil Stabilization / Injection Grouting

Strengthening the Ground

Where ground beneath or behind a structure is loose, washed out or voided, grout injection fills and stabilises it. HAVEN FORCE carries out injection grouting to consolidate soil, fill voids and reduce water movement through the ground.

Void
Filling

Ground
Consolidation

Reduces Water
Movement

Improves
Bearing

Common Problems

What We Typically Find

The conditions most often reported before a soil stabilization / injection grouting scope is developed.

01

Voids beneath a slab

Washed-out or settled ground leaving the slab unsupported.

02

Settlement cracking in the structure

Movement caused by inadequate or eroded ground support.

03

Water channelling through the ground

Loose soil letting water move freely against the structure.

04

Loose fill behind a retaining wall

Poorly compacted backfill settling and loading the wall unevenly.

Scope & Application

What This Service Covers

Service Scope

  • Ground investigation review
  • Drilling pattern design and set-out
  • Sleeve or injection pipe installation
  • Staged cement or chemical grout injection
  • Pressure and volume monitoring
  • Level monitoring during works
  • Verification drilling and testing
  • Making-good and reporting

Suitable For

  • Basements
  • Retaining Walls
  • Construction Joints
  • Lift Pits
  • Water Tanks & Reservoirs
  • Swimming Pools
  • Podiums & Underground
  • Tunnels & Utility Ducts

Key Benefits

  • Fills voids beneath and behind structures
  • Improves ground bearing capacity
  • Reduces water movement through soil
  • Limits further settlement
  • Carried out from limited access points
  • Avoids underpinning where suitable
  • Long-term ground improvement
  • Monitored by pressure and volume
Our Process

Work Methodology

Five controlled stages from first inspection to final quality check.

Assessment — Soil Stabilization / Injection Grouting
1

Assessment

Review ground data and identify the extent of voids or loose material.

Set-Out & Drilling — Soil Stabilization / Injection Grouting
2

Set-Out & Drilling

Design the injection grid and drill to the required depths.

Grout Injection — Soil Stabilization / Injection Grouting
3

Grout Injection

Inject in stages, monitoring pressure and volume throughout.

Monitoring — Soil Stabilization / Injection Grouting
4

Monitoring

Track structure levels during works to control heave and settlement.

Verification — Soil Stabilization / Injection Grouting
5

Verification

Confirm treatment by test drilling and issue a record of works.

Materials & Systems

Specified To The Condition

Systems are selected according to substrate, exposure and project specification. The final specification is confirmed after a site assessment.

Cementitious Grout

Bulk filling of larger voids and consolidation of loose fill.

Chemical / Resin Grout

Penetrates finer soils where cement particles cannot travel.

Injection Sleeves

Allow staged, repeatable injection at controlled depths.

Gallery

Work In Progress

Soil Stabilization / Injection Grouting — site photograph
View
Soil Stabilization / Injection Grouting — site photograph
View
Soil Stabilization / Injection Grouting — site photograph
View
Soil Stabilization / Injection Grouting — site photograph
View
Full Gallery
FAQs

Questions About Soil Stabilization / Injection Grouting

Levels are monitored throughout so injection stays controlled. Where lifting is the objective, it is a separate designed operation.
By monitoring injection pressure and volume against expected take, and by verification drilling afterwards.
Sometimes. It depends on the cause and the loads involved, and is confirmed after ground investigation.
WhatsApp Call Us